|
|
|
 |
 |
|
Lightweight, reliable, award-winning Lithium Ion batteries |
|||
| The IDX ENDURA PowerLink™ system allows you to stack two E-50 or E-80 V-Mount batteries together on a camera back. When using the 48Wh ENDURA E-50 battery in PowerLink mode, you can get an output of 96Wh to your camera. When using the 82Wh ENDURA E-80 battery in PowerLink mode, you can get an output of 164Wh to your camera. Or combine an E-80 with an E-50 and produce 130Wh to your camera. This makes longer run times available, up to eight hours on some cameras. It also makes using on-camera lights possible, without needing a battery belt. And since ENDURA batteries weigh between 1 lb. and 1.62 lbs., your body will thank you. |
|
 |
|
|
E-80 |
VL-2Plus |
||
|
|
|||
  |
This plate is used to mount the Endura E-80/E-80S/E-50/E-50S to the camera. Although some cameras have V-Mount as standard, the IDX V-Mount plate can be fitted to cameras of any manufacturer. In addition, the IDX V-Mount plate features a D-Tap 2 Pin DC out connector for powering on board lights and Digi-View, which shows the battery capacity in the viewfinder. There are two versions of the V-Mount Plate, one with SYNCRON* (P-VS) and one without (P-V). | |
| *Syncron is an energy saving function which activates on-camera lights when recording is engaged and deactivates when the recording is paused. Please check your camera model for compatibility. | ||
 |
|
DEALER DEMO SPECIAL Call 212-967-1774 |
|
E-80S |
FOUR AVAILABLE FOR $350/each |
||
| Capacity:
82Wh/5.7Ah Mean voltage: 14.4V Maximum voltage: 16.8V Maximum load: 65W Typical camera run-time: 184 minutes (@ 26W) Protection circuit: Temperature and current voltage protection. Operating temperature: -20°C~50°C, -4°F~122°F Dimensions: 3.4"(W) x 5.6"(H) x 1.97"(D) 85mm(W) x 142mm(H) x 50mm(D) Weight: 1.57 lbs (700g) |
|
||
| E-80 82Wh Lithium Ion V-Mount Battery Pack with PowerLink |
FOUR AVAILABLE FOR $450/each |
| Capacity:
82Wh/5.7Ah Mean voltage: 14.4V Maximum voltage: 16.8V Maximum load: 65W Typical camera run-time: 184 minutes (@ 26W) Protection circuit: Temperature and current voltage protection. Operating temperature: -20°C~50°C, -4°F~122°F Dimensions: 3.4"(W) x 5.6"(H) x 2.28"(D) 85mm(W) x 142mm(H) x 58mm(D) Weight: 1.62 lbs (735g) |
|
| VL-4 4-Channel Sequential V-Mount Li-Ion Quick Charger |
ONE AVAILABLE FOR $800. |
||
| Quick
charge current: 2.0A/16.8V Charge time: approx. 5.5 hours for 4 batteries Input voltage: auto AC100~240V 50/60Hz Charging of NP-style Li-Ion is available using the A-E2NP adaptor. Dimensions: 4.4"(W) x 6.1" (H) x 9.64" (D)
|
|
| VL-2Plus 2-Channel Sequential Multi-Format V-Mount Quick Charger/Power Supply |
ONE AVAILABLE FOR $550. |
||
| Quick
charge current: 2.0A/16.8V Charge time: less than 5 hours / 2 batteries Input voltage: auto AC100~240V 50/60Hz DC output: 60W/13.8V Charging of NP-style Li-Ion, NiCd, and NiMH is available using the A-E2NP adaptor. Dimensions: 5.78"(W) x 2.83" (H) x 8.14" (D)
|
|
|
